Auto-Shutoff Motor Circuit Breaker 16*63*1p+N*6*AC230*

• Transport Package: Carton
• Specification: 7.5*9.5*12.5cm
• Trademark: none
• Model NO.: 16*63*1P+N*6*AC230*
• Origin: China

Product Description

high-performance hydraulic excavator 

Our high-performance hydraulic excavator is engineered for durability, efficiency, and versatility in construction, mining, and earthmoving projects. Designed with advanced technology and robust materials, this excavator ensures superior digging force, smooth operation, and fuel efficiency. Suitable for heavy-duty applications, it delivers exceptional performance in diverse terrains and working conditions.

Specification

technical parameter

 

1. Normal working conditions

 

1.1. Surrounding air temperature

1.1.1.    The upper limit value does not exceed+40 ℃

1.1.2.  The lower limit value shall not be lower than -5 ℃

1.1.3.  The average value within 24 hours shall not exceed+35 ℃

1.1.4.  Extreme operating temperature -25 ℃~+70 ℃

1.2. above sea level

1.2.1.  The altitude of the installation location shall not exceed 3000 meters

1.3. Atmospheric conditions

1.3.1. When the ambient air temperature is+40 ℃, the relative humidity of the air does not exceed 50%, and there can be higher relative humidity at lower temperatures

(For example, 90% humidity at 20 ℃)

1.4. class of pollution

1.4.1.  The pollution level used by the protector is level 2, which means that in general, there is only non-conductive pollution, but occasional transient conductive pollution caused by condensation can be expected

1.5. mounting classes

1.5.1.  mounting classes Ⅱ ,Ⅲ

 

2.parameter

 

2.1.rated voltage:AC230V/400V

2.2. Current shell frame;63A

2.3. breaking capacity: Ics is 6000A

2.4. Rated current In;In  16A  25A  32A  40A 50A  63A

2.5. Life: Mechanical lifespan of 10000 on-off cycles, electrical lifespan of 6000 on-off cycles

2.6. wiring:Using clamp connection terminals

2.6.1.   The cross-sectional area of the wire is 25  mm²

4.2.7. set:set on the standard 35.5×7.5mm guide rail.

4.2.8. SPD:

4.2.8.1.  The over current trip characteristics of the protector when the ambient air temperature is between 30-35 ℃ (i.e. without temperature compensation) are shown in the table below

number
Type of over current instantaneous release device
Rated current of circuit breaker In

Technical Specifications

number	Type of over current instantaneous release device	Rated current of circuit breaker In	Initial state	Test current	set time	Expected results
1	BCD	In∈63A	cold	1.13In	≥1h	not trip
		In>63A			≥2h
2	BCD	In≤63A	hot	1.45In	≤1h	trip
		In>63A			≤2h
3	BCD	In≤32A	cold	2.55In	1s(t(60s	trip
		In>32A			1s<t<120s
4	B	all	cold	3In	≥0.1s	not trip
	C			5In
	D			10In
5	B	all	cold	5In	<0.1s	trip
	C			10In
	D			20In

Standard Warranty: 12 months or 2,000 operating hours (whichever comes first).
Extended Warranty: Optional coverage up to 36 months.
Global Support: 24/7 technical assistance and spare parts supply.
Training: On-site or remote operation/maintenance training.

Company Profile

ZF TRADES Co., Ltd.

note

 

 

1. The circuit breaker should not be affected by rainwater during transportation and storage, and the product should be stored in a well ventilated area.

2. During use, dust and dirt should be regularly removed, and it is best to use a face mask to expose only the handle part of the circuit breaker.

3. Before use, check whether the basic technical data on the nameplate or mark meets the requirements. The protection characteristics of this circuit breaker are determined by the manufacturer

During use, it cannot be disassembled or adjusted arbitrarily.

4. The neutral wire must not be connected incorrectly.

5. Before use, the connecting screw must be tightened to avoid poor contact and damage to the product.

6. The setting temperature of this series of circuit breakers is 30+5 ℃. If multiple circuit breakers are installed in the same sealed box, they should be used with reduced capacity

The coefficient is 0.8

List:

 Product * 1;

 Instruction manual (connotation product qualification certificate) * 1;

 Antenna * 1 (WiFi, 4G included);

85 wiring terminal * 1        

FAQ

Q: What’s the lead time for orders?
A: Standard models ship in 15–30 days; customized units require 30–45 days.

Q: Do you provide after-sales service overseas?
A: Yes, we have partnered service centers in key regions.

Q: Can I request a customized bucket size?
A: Absolutely! We offer tailored attachments.

Q: What documents do you provide for export?
A: Full export package (Commercial Invoice, Packing List, Bill of Lading, COC, etc.).

Q: How do I place an order?
A: Contact us via email/phone for a quote, then confirm with a PO.